Width 1 [mm]: 123,1 mm ; Height 1 [mm]: 52 mm ; Thickness/Strength 1 [mm]: 16,5 mm ; Brake System: ATE ; Weight [kg]: 1,08 kg ; ArticleState: Normal ; General Information: http://www.abs-bv.nl/pdp/37216.html
Length [mm]: 123,1 mm ; Thickness [mm]: 16,6 mm ; Height [mm]: 52 mm ; Manufacturer Restriction: ATE ; Wear Warning Contact: not prepared for wear indicator ; Fitting Position: Rear Axle ; ArticleState: Normal
Length 1 [mm]: 155,1 mm ; Length 2 [mm]: 156,3 mm ; Thickness [mm]: 18,5 mm ; Brake System: Ate ; Height [mm]: 72,9 mm ; Fitting Position: Front Axle ; ArticleState: Normal
Manufacturer Restriction: ATE ; Wear Warning Contact: not prepared for wear indicator ; Height [mm]: 67,2 mm ; Length [mm]: 156,4 mm ; Thickness [mm]: 18 mm ; Fitting Position: Front Axle ; ArticleState: Normal
Width 1 [mm]: 155,1 mm ; Height 1 [mm]: 62,4 mm ; Width 2 [mm]: 156,3 mm ; Height 2 [mm]: 67 mm ; Thickness [mm]: 18,1 mm ; Wear Warning Contact: not prepared for wear indicator ; Wear Warning Contact: excl. wear warning contact ; Brake System: ATE ; Inspection Tag: E1 90R-011403/1339 ; MAPP code available: ; ArticleState: Normal ; Technical Information: Es ist technisch möglich, ATE Ceramic Bremsbeläge mit der Po
werDisc oder mit gelochten Bremsscheiben zu kombinieren.
Die Bremsleistung bleibt bei dieser Paarung gleich hoch, wie
bei einem ATE Original- oder OE-Bremsbelag.
Das Zusammenspiel der beiden Bauteile kann aber zu einer erh
öhten Geräuschentwicklung beim Bremsvorgang führen.
ATE Ceramic Bremsbeläge sind Beläge, die für den komfortorie
ntierten Fahrer entwickelt wurden.
Grundsätzlich empfehlen wir ATE Ceramic Bremsbeläge daher mi
t normalen , das heißt glatten Bremsscheiben zu kombinieren.
Width [mm]: 123 mm ; Height [mm]: 52 mm ; Thickness [mm]: 16,6 mm ; Wear Warning Contact: not prepared for wear indicator ; Wear Warning Contact: excl. wear warning contact ; Supplementary Article/Supplementary Info: without spring ; Brake System: ATE ; Inspection Tag: E1 90R-011403/1341 ; MAPP code available: ; ArticleState: Normal ; Technical Information: Ersetzt rückwirkend Bremsbelag mit Federn. Siehe Info Artike
lbild.
; Technical Information: Es ist technisch möglich, ATE Ceramic Bremsbeläge mit der Po
werDisc oder mit gelochten Bremsscheiben zu kombinieren.
Die Bremsleistung bleibt bei dieser Paarung gleich hoch, wie
bei einem ATE Original- oder OE-Bremsbelag.
Das Zusammenspiel der beiden Bauteile kann aber zu einer erh
öhten Geräuschentwicklung beim Bremsvorgang führen.
ATE Ceramic Bremsbeläge sind Beläge, die für den komfortorie
ntierten Fahrer entwickelt wurden.
Grundsätzlich empfehlen wir ATE Ceramic Bremsbeläge daher mi
t normalen , das heißt glatten Bremsscheiben zu kombinieren.
Width 1 [mm]: 155,1 mm ; Height 1 [mm]: 72,9 mm ; Width 2 [mm]: 156,3 mm ; Height 2 [mm]: 72,9 mm ; Thickness [mm]: 18,8 mm ; Wear Warning Contact: not prepared for wear indicator ; Wear Warning Contact: excl. wear warning contact ; Brake System: ATE ; Inspection Tag: E1 90R-011403/1373 ; MAPP code available: ; ArticleState: Normal ; Technical Information: Es ist technisch möglich, ATE Ceramic Bremsbeläge mit der Po
werDisc oder mit gelochten Bremsscheiben zu kombinieren.
Die Bremsleistung bleibt bei dieser Paarung gleich hoch, wie
bei einem ATE Original- oder OE-Bremsbelag.
Das Zusammenspiel der beiden Bauteile kann aber zu einer erh
öhten Geräuschentwicklung beim Bremsvorgang führen.
ATE Ceramic Bremsbeläge sind Beläge, die für den komfortorie
ntierten Fahrer entwickelt wurden.
Grundsätzlich empfehlen wir ATE Ceramic Bremsbeläge daher mi
t normalen , das heißt glatten Bremsscheiben zu kombinieren.
Fitting Position: Front Axle ; Length [mm]: 155,2 mm ; Width [mm]: 62,4 mm ; Thickness [mm]: 17,8 mm ; Brake Lining Backplate Material: Metal ; ArticleState: Normal
Thickness [mm]: 76 mm ; Inner diameter [mm]: 15 mm ; Outer diameter [mm]: 90 mm ; Supplementary Article/Supplementary Info: with add-on material ; Weight [kg]: 0,12 kg ; Filter type: Filter Insert ; Filter type: Pollen Filter ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Height 1 [mm]: 51,9 mm ; Brake System: Ate - Teves ; Width 1 [mm]: 123 mm ; Thickness/Strength 1 [mm]: 16,5 mm ; Number of Springs: 2 ; Number of pads: 4 ; ArticleState: Normal ; Technical Information: Number of Shims: 4
Height 1 [mm]: 62,4 mm ; Height 2 [mm]: 67 mm ; Brake System: Ate - Teves ; Width 1 [mm]: 155,1 mm ; Width 2 [mm]: 156,4 mm ; Thickness/Strength 1 [mm]: 18,5 mm ; Number of Springs: 2 ; Number of pads: 4 ; ArticleState: Normal ; Technical Information: Number of Shims: 4
; Technical Information: Back Spring Length: 49
Number of Teeth: 116 ; Length [mm]: 1105 mm ; Width [mm]: 25,4 mm ; ArticleState: Normal ; General Information: http://www.bosch-automotive-catalog.com/pdp/1987949605
Number of Teeth: 116 ; Length [mm]: 1105 mm ; Width [mm]: 25,4 mm ; Pulleys contained: 2 ; ArticleState: Normal ; General Information: http://www.bosch-automotive-catalog.com/pdp/1987948208
Thickness [mm]: 16,4 mm ; Width [mm]: 123 mm ; Height [mm]: 52 mm ; Wear Warning Contact: not prepared for wear indicator ; Wear Warning Contact: excl. wear warning contact ; Supplementary Article/Supplementary Info: without spring ; Brake System: ATE ; ArticleState: Normal
Number of Teeth: 116 ; Width [mm]: 25,4 mm ; Weight [kg]: 0,181 kg ; Packaging length [cm]: 25,5 cm ; Packaging width [cm]: 16 cm ; Packaging height [cm]: 3 cm ; ArticleState: Normal
Number of Teeth: 116 ; Width [mm]: 25,4 mm ; Weight [kg]: 0,737 kg ; Packaging length [cm]: 26,5 cm ; Packaging width [cm]: 16,5 cm ; Packaging height [cm]: 9,5 cm ; ArticleState: Normal
Parameter: DIPAR ; Manufacturer Restriction: ate ; Thickness [mm]: 18 mm ; Length [mm]: 156,4 mm ; Height [mm]: 67,2 mm ; Wear Warning Contact: not prepared for wear indicator ; ArticleState: Normal
Parameter: DIPAR. ; Manufacturer Restriction: ate ; Thickness [mm]: 16,6 mm ; Length [mm]: 123,1 mm ; Height [mm]: 52 mm ; Wear Warning Contact: not prepared for wear indicator ; ArticleState: Normal
Number of pads: 4 ; Quality: R90 Homologated ; Weight [kg]: 0,969 kg ; WVA Number: 24136 ; Fitting Position: Rear Axle ; Length [mm]: 123,1 mm ; Width [mm]: 51,9 mm ; Thickness [mm]: 16,3 mm ; Wear Warning Contact: not prepared for wear indicator ; Supplementary Article/Supplementary Info: with spring ; Brake System: ATE ; ArticleState: Normal
Width [mm]: 25 mm ; Number of Teeth: 116 ; Weight [kg]: 0,95 kg ; Observe service information: ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 29 mm ; Outer diameter [mm]: 60 mm ; Weight [kg]: 0,25 kg ; ArticleState: Normal ; General Information: für Zahnriemen
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 156,4 mm ; Width [mm]: 155,2 mm ; Fitting Position: Front Axle ; Height [mm]: 67 mm ; Height [mm]: 62,2 mm ; Thickness [mm]: 18 mm ; Weight [kg]: 1,8 kg ; Wear Warning Contact: excl. wear warning contact ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 25 mm ; Number of Teeth: 116 ; Weight [kg]: 0,5 kg ; Belts: with trapezoidal tooth profile ; Observe service information: ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 123,1 mm ; Fitting Position: Rear Axle ; Height [mm]: 52 mm ; Height [mm]: 51,9 mm ; Thickness [mm]: 16,6 mm ; Weight [kg]: 0,9 kg ; Wear Warning Contact: excl. wear warning contact ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 156,4 mm ; Fitting Position: Front Axle ; Height [mm]: 72,9 mm ; Thickness [mm]: 18,5 mm ; Weight [kg]: 2,134 kg ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Fitting Position: Front Axle ; Thickness [mm]: 18,5 mm ; Length [mm]: 155,1 mm ; Width [mm]: 72,9 mm ; Supplementary Article/Supplementary Info: with accessories ; Brake System: ATE ; Length 1 [mm]: 156,3 mm ; Supplementary Article/Info 2: with piston clip ; WVA Number: 23912 ; Inspection Tag: R90 Homologated ; Weight [kg]: 2,3 kg ; Wear Warning Contact: not prepared for wear indicator ; ArticleState: Normal ; Technical Information: Technical Information:https://goo.gl/7v19mD
; Brief Information: http://ecofriction.com
; Technical Information: http://www.ferodo.com/de-de/Pages/Home.aspx
SICHER: Kürzerer Bremsweg als viele Wettbewerbern
QUALITÄT: Erfüllt OE-Spezifikationen und übertrifft viele
Normen
EASY : Einfache Einbau auf 99% der Fahrzeuge in Europa
EFFEKTIV: Hervorragendes Anti-Fading und
Nassansprechverhalten
HALTBAR: Längere Lebensdauer und geringerer
Bremsscheibenverschleiß
GERÄUSCHARM: Geräuschmindernde Eigenschaften fördern den
Fahrkomfort
Über 100 Jahre Erfahrung auf dem Gebiet Reibung und Bremsen
bedeuten, dass der Name Ferodo gleichbedeutend mit
Spitzenleistung ist. Ferodo war weltweit die erste Marke,
die sich ausschließlich mit der Konstruktion und Herstellung
von Reibmitteln beschäftigt. Und heute entwickeln unsere
erfahrenen Ingenieure richtungsweisende Lösungen sogar für
schwierigste Bedingungen.
Fitting Position: Rear Axle ; Thickness [mm]: 16,3 mm ; Length [mm]: 123,1 mm ; Width [mm]: 51,9 mm ; Supplementary Article/Supplementary Info: with spring ; Brake System: ATE ; WVA Number: 24136 ; WVA Number: 24137 ; Inspection Tag: R90 Homologated ; Weight [kg]: 0,969 kg ; Wear Warning Contact: not prepared for wear indicator ; ArticleState: Normal ; Technical Information: Technical Information:https://goo.gl/7tH7f2
; Brief Information: http://ecofriction.com
; Technical Information: http://www.ferodo.com/de-de/Pages/Home.aspx
SICHER: Kürzerer Bremsweg als viele Wettbewerbern
QUALITÄT: Erfüllt OE-Spezifikationen und übertrifft viele
Normen
EASY : Einfache Einbau auf 99% der Fahrzeuge in Europa
EFFEKTIV: Hervorragendes Anti-Fading und
Nassansprechverhalten
HALTBAR: Längere Lebensdauer und geringerer
Bremsscheibenverschleiß
GERÄUSCHARM: Geräuschmindernde Eigenschaften fördern den
Fahrkomfort
Über 100 Jahre Erfahrung auf dem Gebiet Reibung und Bremsen
bedeuten, dass der Name Ferodo gleichbedeutend mit
Spitzenleistung ist. Ferodo war weltweit die erste Marke,
die sich ausschließlich mit der Konstruktion und Herstellung
von Reibmitteln beschäftigt. Und heute entwickeln unsere
erfahrenen Ingenieure richtungsweisende Lösungen sogar für
schwierigste Bedingungen.
Fitting Position: Front Axle ; Thickness [mm]: 17,5 mm ; Length [mm]: 156 mm ; Width [mm]: 62,5 mm ; Width [mm]: 66,9 mm ; Height 1 [mm]: 66,9 mm ; Height 2 [mm]: 62,5 mm ; Brake System: ATE ; Length 1 [mm]: 155 mm ; Supplementary Article/Info 2: with piston clip ; WVA Number: 23723 ; Inspection Tag: R90 Homologated ; Weight [kg]: 2,25 kg ; Wear Warning Contact: not prepared for wear indicator ; ArticleState: Normal ; Technical Information: Technical Information:https://goo.gl/DAtuKU
; Brief Information: http://ecofriction.com
; Technical Information: http://www.ferodo.com/de-de/Pages/Home.aspx
SICHER: Kürzerer Bremsweg als viele Wettbewerbern
QUALITÄT: Erfüllt OE-Spezifikationen und übertrifft viele
Normen
EASY : Einfache Einbau auf 99% der Fahrzeuge in Europa
EFFEKTIV: Hervorragendes Anti-Fading und
Nassansprechverhalten
HALTBAR: Längere Lebensdauer und geringerer
Bremsscheibenverschleiß
GERÄUSCHARM: Geräuschmindernde Eigenschaften fördern den
Fahrkomfort
Über 100 Jahre Erfahrung auf dem Gebiet Reibung und Bremsen
bedeuten, dass der Name Ferodo gleichbedeutend mit
Spitzenleistung ist. Ferodo war weltweit die erste Marke,
die sich ausschließlich mit der Konstruktion und Herstellung
von Reibmitteln beschäftigt. Und heute entwickeln unsere
erfahrenen Ingenieure richtungsweisende Lösungen sogar für
schwierigste Bedingungen.
Fitting Position: Front Axle ; Length 1 [mm]: 155,3 mm ; Length 2 [mm]: 156,5 mm ; Thickness/Strength 1 [mm]: 18 mm ; Weight [kg]: 2,25 kg ; Thickness/Strength 2 [mm]: 18 mm ; Specification: Racing use only ; Width 2 [mm]: 72,9 mm ; Specification: DS1.11 ; Width 1 [mm]: 72,9 mm ; ArticleState: Normal
Fitting Position: Front Axle ; Length [mm]: 156,4 mm ; Width [mm]: 155,4 mm ; Thickness [mm]: 18,3 mm ; Height [mm]: 67,2 mm ; Brake System: Ate ; ArticleState: Normal
Manufacturer Restriction: ATE ; Wear Warning Contact: not prepared for wear indicator ; Height [mm]: 72,9 mm ; Length [mm]: 155,2 mm ; Thickness [mm]: 18,5 mm ; Height 2 [mm]: 72,9 mm ; Length 2 [mm]: 156,4 mm ; ArticleState: on demand
Manufacturer Restriction: ATE ; Length [mm]: 156,4 mm ; Height [mm]: 67,2 mm ; Thickness [mm]: 18 mm ; Wear Warning Contact: not prepared for wear indicator ; ArticleState: on demand
Thickness [mm]: 18,5 mm ; Width [mm]: 155,2 mm ; Weight [kg]: 2,4 kg ; Height 1 [mm]: 72,9 mm ; ArticleState: Normal ; Technical Information: Contents: Contents: 2 chamfered pads with small backsprings,
2 chamfered pads with large backsprings
Thickness [mm]: 16,6 mm ; Width [mm]: 123,1 mm ; Weight [kg]: 1,1 kg ; Height 1 [mm]: 52 mm ; ArticleState: Normal ; Technical Information: Contents: Contents: 2 pads with top springs, 2 without
Width [mm]: 123 mm ; Height [mm]: 52 mm ; Thickness [mm]: 16,4 mm ; Wear Warning Contact: not prepared for wear indicator ; Wear Warning Contact: excl. wear warning contact ; Supplementary Article/Supplementary Info: without spring ; Brake System: ATE ; Inspection Tag: E1 90R-01789/724 ; ArticleState: not available
Height 1 [mm]: 51,9 mm ; Brake System: Ate - Teves ; Width 1 [mm]: 123 mm ; Thickness/Strength 1 [mm]: 16,5 mm ; Number of Springs: 2 ; Number of pads: 4 ; ArticleState: Normal ; Technical Information: Number of Shims: 4
Height 1 [mm]: 62,4 mm ; Height 2 [mm]: 67 mm ; Brake System: Ate - Teves ; Width 1 [mm]: 155,1 mm ; Width 2 [mm]: 156,4 mm ; Thickness/Strength 1 [mm]: 18,5 mm ; Number of Springs: 2 ; Number of pads: 4 ; ArticleState: Normal ; Technical Information: Number of Shims: 4
; Technical Information: Back Spring Length: 49
Thickness [mm]: 18,3 mm ; Height 1 [mm]: 62,4 mm ; Height 2 [mm]: 67 mm ; for article number: 05P1190 ; Brake System: ATE ; Width 1 [mm]: 155,1 mm ; Width 2 [mm]: 156,3 mm ; ArticleState: Normal
Fitting Position: Rear Axle ; Brake System: ATE ; Wear Warning Contact: not prepared for wear indicator ; Vibration: with vibration damper ; ArticleState: Normal
Length [mm]: 1059 mm ; Width [mm]: 25 mm ; Number of Teeth: 116 ; Driven Units: Driven unit: camshaft ; Driven Units: Driven unit: water pump ; ArticleState: Article to be discontinued
Outer diameter [mm]: 92 mm ; Inner diameter [mm]: 15 mm ; Height [mm]: 73 mm ; Supplementary Article/Supplementary Info: with seal ; ArticleState: Normal
Filter type: Filter Insert ; Height 1 [mm]: 65,5 mm ; Diameter [mm]: 91,5 mm ; Seal Diameter [mm]: 17,2 mm ; Height [mm]: 75,3 mm ; ArticleState: Normal
Fitting Position: Rear Axle ; Length [mm]: 123,2 mm ; Height [mm]: 52 mm ; Thickness [mm]: 16 mm ; Wear Warning Contact: excl. wear warning contact ; Wear Warning Contact: not prepared for wear indicator ; Brake System: Teves ; Specification: ECE R90 APPROVED ; Supplementary Article/Info 2: with anti-squeak plate ; Part number of recommended accessories: 109-1123 ; Part number of recommended accessories: 109-1659 ; Part number of recommended accessories: 109-1755 ; ArticleState: Normal
Fitting Position: Rear Axle ; Width [mm]: 123 mm ; Height [mm]: 51,9 mm ; Thickness [mm]: 16,1 mm ; Wear Warning Contact: not prepared for wear indicator ; Brake System: ATE ; Supplementary Article/Supplementary Info: with spring ; Supplementary Article/Info 2: with anti-squeak plate ; Quality: PREMIUM ; ArticleState: Normal ; General Information: Bremsbeläge mit kurzer Einbremszeit und Vermeidung von
Fading durch Scorching-Technologie. Optimale Belagsmischung
sorgt für sicheres Bremsverhalten.
Diameter [mm]: 90 mm ; Supplementary Article/Supplementary Info: with seal ; Filter type: Filter Insert ; Height [mm]: 76 mm ; Diameter 1 [mm]: 15 mm ; ArticleState: Normal
Fitting Position: Rear Axle ; Width [mm]: 123 mm ; Height [mm]: 51,9 mm ; Thickness [mm]: 16,1 mm ; Wear Warning Contact: not prepared for wear indicator ; Brake System: ATE ; Supplementary Article/Supplementary Info: with spring ; Supplementary Article/Info 2: with anti-squeak plate ; ArticleState: Normal
Pulleys contained: 2 ; Number of belts: 1 ; Packaging length [cm]: 26,1 cm ; Packaging width [cm]: 15,4 cm ; Packaging height [cm]: 9,4 cm ; ArticleState: Normal
Fitting Position: Front Axle ; Thickness [mm]: 17,5 mm ; Height 1 [mm]: 66,9 mm ; Height 2 [mm]: 62,5 mm ; Brake System: Ate ; Length 1 [mm]: 156 mm ; Length 2 [mm]: 155 mm ; ArticleState: Normal
Fitting Position: Front Axle ; Thickness [mm]: 17,5 mm ; Height 1 [mm]: 66,9 mm ; Height 2 [mm]: 62,5 mm ; Brake System: Ate ; Length 1 [mm]: 156 mm ; Length 2 [mm]: 155 mm ; ArticleState: Normal
Length [mm]: 123,1 mm ; Width [mm]: 52 mm ; Height [mm]: 16,6 mm ; Supplementary Article/Supplementary Info: with spring ; ArticleState: Article to be discontinued
Engine Code: D4204T ; Driven Units: Driven unit: camshaft ; Number of Teeth: 116 ; Width [mm]: 25,4 mm ; Driven Units: excl. water pump ; Supplementary Article/Info 2: with belt ; ArticleState: Normal
Engine Code: D4204T ; Driven Units: Driven unit: camshaft ; Number of Teeth: 116 ; Width [mm]: 25,4 mm ; Driven Units: excl. water pump ; Supplementary Article/Info 2: with belt ; ArticleState: Normal
Number of Teeth: 116 ; Width [mm]: 25,4 mm ; Belts: with rounded tooth profile ; ArticleState: Normal ; General Information: SKF-Empfehlung: Spannrollensatz
Number of Teeth: 116 ; Width [mm]: 25,4 mm ; Belts: with rounded tooth profile ; ArticleState: Normal ; General Information: Bitte beachten: Technik-Info im Anhang (Service Information)
; General Information: Spannrollensatz
Number of Teeth 1: 116 ; Number of belts: 1 ; Weight [g]: 782 g ; Width 1 [mm]: 25,4 mm ; ArticleState: Normal ; Technical Information: Anzahl der Spannrollen:2
Filter type: Filter Insert ; Diameter [mm]: 91,5 mm ; Height [mm]: 75,3 mm ; Seal Diameter [mm]: 17,2 mm ; Height 1 [mm]: 65,5 mm ; ArticleState: Normal
Fitting Position: Front Axle ; Manufacturer Restriction: ATE ; Thickness [mm]: 18,4 mm ; Inspection Tag: R90 Homologated ; Brake System: ATE ; ArticleState: Normal
Fitting Position: Front Axle ; Height [mm]: 72,9 mm ; Thickness [mm]: 18,5 mm ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 25 mm ; Number of Teeth: 116 ; Weight [kg]: 0,95 kg ; Observe service information: ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 25 mm ; Number of Teeth: 116 ; Weight [kg]: 0,5 kg ; Belts: with trapezoidal tooth profile ; Observe service information: ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 29 mm ; Outer diameter [mm]: 60 mm ; Weight [kg]: 0,25 kg ; ArticleState: Normal ; General Information: für Zahnriemen
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 156,4 mm ; Width [mm]: 155,2 mm ; Fitting Position: Front Axle ; Height [mm]: 67 mm ; Height [mm]: 62,2 mm ; Thickness [mm]: 18 mm ; Weight [kg]: 1,8 kg ; Wear Warning Contact: excl. wear warning contact ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Width [mm]: 123,1 mm ; Fitting Position: Rear Axle ; Height [mm]: 52 mm ; Height [mm]: 51,9 mm ; Thickness [mm]: 16,6 mm ; Weight [kg]: 0,9 kg ; Wear Warning Contact: excl. wear warning contact ; ArticleState: Normal ; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Manufacturer Restriction: ATE ; Thickness [mm]: 16,6 mm ; Length [mm]: 123,1 mm ; Height [mm]: 52 mm ; Wear Warning Contact: not prepared for wear indicator ; Brake System: Ate ; ArticleState: Normal
Manufacturer Restriction: ATE ; Thickness [mm]: 18 mm ; Width [mm]: 155,2 mm ; Height [mm]: 62,5 mm ; Wear Warning Contact: not prepared for wear indicator ; Brake System: Ate-Teves ; ArticleState: Normal
Manufacturer Restriction: ATE ; Thickness [mm]: 18,6 mm ; Length 1/ Length 2 [mm]: 156,3/155,1 mm ; Height [mm]: 72,9 mm ; Wear Warning Contact: not prepared for wear indicator ; for brake disc diameter [mm]: 345 mm ; ArticleState: Normal
Manufacturer Restriction: ATE ; Length [mm]: 123,1 mm ; Height [mm]: 52 mm ; Thickness [mm]: 16,6 mm ; for brake disc diameter [mm]: 280 mm ; Wear Warning Contact: not prepared for wear indicator ; Brake System: not for carbon-ceramic brake discs ; Brake System: only in conjunction with steel brake discs ; Inspection Tag: E9 90R-02A0120/4281 ; ArticleState: Normal
Diameter [mm]: 91 mm ; Height [mm]: 73 mm ; Inner diameter [mm]: 14,8 mm ; Outer diameter [mm]: 91,5 mm ; Supplementary Article/Supplementary Info: with accessories ; Supplementary Article/Supplementary Info: with seal ; Filter type: Filter Insert ; ArticleState: not available ; General Information:
https://www.autoteile.de/produkt/V42-0055
Fitting Position: Front Axle ; Thickness [mm]: 18,1 mm ; Height 1 [mm]: 62,4 mm ; Height 2 [mm]: 67 mm ; Brake System: ATE ; Width 1 [mm]: 155,1 mm ; Width 2 [mm]: 156,3 mm ; ArticleState: Normal ; General Information:
https://www.autoteile.de/produkt/V25-0272
Fitting Position: Rear Axle ; Diameter [mm]: 177,8 mm ; Width [mm]: 25 mm ; Brake System: LUCAS ; ArticleState: Normal ; General Information:
https://www.autoteile.de/produkt/V95-0288
for article number: 626.1190 ; Width 2 [mm]: 156,3 mm ; Brake System: ATE ; Height 1 [mm]: 62,4 mm ; Thickness [mm]: 18,3 mm ; Width 1 [mm]: 155,1 mm ; Height 2 [mm]: 67 mm ; ArticleState: Normal
Width 1 [mm]: 155,1 mm ; Width 2 [mm]: 156,3 mm ; Brake System: ATE ; for article number: 626.1277 ; Height [mm]: 72,9 mm ; Thickness [mm]: 18,6 mm ; ArticleState: Normal
Manufacturer Restriction: ATE ; Thickness [mm]: 17,4 mm ; Length [mm]: 155,2 mm ; Height [mm]: 62,4 mm ; Length 1 [mm]: 156,4 mm ; Height 1 [mm]: 67,3 mm ; Wear Warning Contact: not prepared for wear indicator ; ArticleState: Normal
Manufacturer Restriction: ATE ; Thickness [mm]: 15,6 mm ; Length [mm]: 123 mm ; Height [mm]: 51,9 mm ; Wear Warning Contact: not prepared for wear indicator ; ArticleState: Normal
Number of Teeth: 116 ; Width [mm]: 25,4 mm ; Weight [kg]: 0,737 kg ; Packaging length [cm]: 26,5 cm ; Packaging width [cm]: 16,5 cm ; Packaging height [cm]: 9,5 cm ; ArticleState: Normal ; General Information: Contitech CT1091K1
Number of Teeth: 116 ; Width [mm]: 25,4 mm ; Weight [kg]: 0,181 kg ; Packaging length [cm]: 25,5 cm ; Packaging width [cm]: 16 cm ; Packaging height [cm]: 3 cm ; ArticleState: Normal ; General Information: Contitech CT1091
Diameter [mm]: 91,5 mm ; Height [mm]: 75,3 mm ; Seal Diameter [mm]: 17,2 mm ; Height 1 [mm]: 65,5 mm ; Filter type: Filter Insert ; ArticleState: Normal ; General Information: Mahle KX 201D
Number of Teeth: 116 ; Width [mm]: 25 mm ; Weight [kg]: 0,5 kg ; Required quantity: 1 ; Belts: with trapezoidal tooth profile ; ArticleState: Normal ; General Information: Swag 50924197
Fitting Position: Front Axle ; Manufacturer Restriction: ATE ; Length 1 [mm]: 155,1 mm ; Length 2 [mm]: 156,4 mm ; Width 1 [mm]: 62,4 mm ; Width 2 [mm]: 67 mm ; Thickness [mm]: 17,5 mm ; Weight [kg]: 2,03 kg ; ArticleState: Normal